INFI 40B

Composition

Benzalkonium Chloride Solution	40% v/v
Equivalent to Benzalkonium chloride	20 % w/v
Disodium Edetate	1.5% w/v

Colour- Sunset yellow

Application:
General disinfection of surfaces: Washing and mopping of walls , floors and Furnitures with 2% solution .

Features:
Aldehyde free hence proven safety for users Bio-degradable
Super concentrated - cost effective
Deodorant in true sense - destroys odour and not mask it
Non toxic, non corrosive and non- irritating in use dilutions
Effective surface wetting and hence good cleansing efficiency
Packing: Bottle: as per market demand.
Shelf life: 36 months.

INFIOCID

Composition
Each 100 gms contains

Ethanol IP	10 gms
2-Propanol	9 gms
1-Propanol	6 gms

Application:
It is suitable for the rapid spray/wipe disinfection of sensitive surfaces , medical devices , for disinfection in Pharmaceutical sterile sections and in between surgeries as emergency disinfectant.

Directions for use:
It is ready to use. Saturate the cloth with product solution and wipe surfaces. If product is sprayed on, wipe with cloth. When surfaces are wetted completely, the solution is effective within 30 seconds.

Features:
Aldehyde - free rapid disinfectant - cleaner for sensitive surfaces.
Excellent in critical areas like OTs, HIV and dental clinics.
Rapid disinfection of OTs in between surgeries. Preferred alcohol based surface disinfectant .Drying without visible residues.
Especially material-friendly.
Packing: Bottle: as per demand (without spray)
Shelf life: 36 months.

INFISHIELD

Composition:
Stabilized Hydrogen Peroxide -  11% w/v
Diluted Silver Nitrate Solution - 0.01% w/v

Application:
Eco-friendly, non-toxic surface disinfectant and fumigant in hospitals.

Direction for use:
For Surface disinfection use 10 % v/v solution : for disinfection of surfaces of Hospitals, Operation Theaters, ICU's, Polyclinics, Dental Clinics, OPD's Blood banks, Clinical/Diagnostic Laboratories
By Fogging: Fogging can be done by O. T. care machine. Optimum efficacy is obtained with low pressure.
Sprayers: A 1000 cu. ft. area room is ready in 60 minutes with only 20% product solution.

Features:
Highly effective.
Eco-friendly biodegradable Environmental disinfectant since H²O² breaks down into water and Oxygen thus leaving no trace of element.
Non-toxic, Non-irritating disinfectant.
Non carcinogenic and non mutagenic
Packing: Bottle: as per demand.
Shelf life: 12 months.

INFIOCID SP

Composition
Each 100 gms contains:

1, 6 Dihydroxy 2,5 – dioxyhexane (Chemically bound formaldehyde)	11.2 gms
Glutaraldehyde	5.0 gms
Benzalkonium chloride	5.0 gms
Alkyl Urea Derivative	3.0 gms

Application:
Surface disinfectant for high risk areas.

Direction for use:
Surface disinfection in operation theaters and critical areas – Use 2 % solution –contact time 1 hour
Surface disinfection consulting rooms, dressing rooms, wards – Use 0.5 %
Contact time – 30 minutes

Features:
It is useful for disinfection of high-risk areas.
Glutaraldehyde combines with chemically bound formaldehyde in hydrolisation with water to give excellent microbicidal activity.
Excellent material compatibility. Separate corrosion inhibitors are added for protection of expensive surfaces. Prolonged residual effect. No irritation
Packing: Bottle: as per demand.
Shelf life: 24 months.

INFIHIGENE

Composition
Polymeric Biguanide Hydrochlorid -  < 10%
(Alkyl Dimethyl Benzyl Ammonium Chloride
Didecyl Dimethyl Ammonium Chloride) . -  < 10%

Application:
High level surface and aerial disinfectant for hospital use - Floors, Walls, Tables, Beds, trolleys, Chairs, Overhead Lights, Clothing Uniforms, Bed Sheet, Footwear, Machines Appliances, Other surfaces.
High level disinfectant for critical areas such as Operation room, ICU, NICU, ICCU etc .

Directions for use:
Non critical areas in hospitals – 1 % solution
Surfaces with blood, vomit and other body fluid – 10 % solution
Critical areas like OT, ICU, ICCU, 2 % solution Laundry – 5 % solution.

Features:
Aldehyde free surface disinfectant.
Excellent compatibility with rubber, plastics, fiber glass and other metals.
Packing: Bottle: as per market demand.
Shelf life: Concentrated solution: 24 months,
Diluted solution: 7 days

INFIMAX

Composition
Potassium peroxymonosulphate. -  50%w/w

Application:
Disinfection of hard surfaces such as floors, trolleys, bed frames, work benches, sinks and baths.
Disinfection of medical devices and disinfection of laboratory equipments

Direction for use:
For all the above applications use 1 % product Solution with water.
Add the appropriate amount of product and stir until the powder has dissolved leaving a clear pink solution.
Discard product solution when colour fades.

Features:
Powerful broad spectrum disinfectant, Cleans and disinfectants in a single step .
Aldehyde free formulation, so safe for user.
It is supplied as a space saving powder presentation.
Environmental friendly.
Packing: Bottle: as per market demand.
Shelf life: 36 months
Product 1% solution is stable for 7 days.

INFIOCID RF

Composition:
Each 100 gms contains:
2-praponol  -  40 gms
1-Propanol  - 22 gms

Application:
It is suitable for the rapid spray/wipe disinfection of sensitive surfaces , medical devices , for disinfection in Pharmaceutical sterile sections and in between surgeries as emergency disinfectant.

Directions for use :
It is ready to use.
Saturate the cloth with product solution and wipe surfaces .
If product is sprayed on , wipe with cloth .
When surfaces are wetted completely , the solution is effective within 30 seconds .

Features:
Aldehyde - free rapid disinfectant - cleaner for sensitive surfaces.
Excellent in critical areas like OTs, HIV and dental clinics.
Rapid disinfection of OTs in between surgeries. Preferred alcohol based surface disinfectant .
Drying without visible residues.
Especially material-friendly.
Packing: Bottle: as per demand with spray.
Shelf life: 36 months.

INFIQUAT

Composition:

Alkyl Dimethyl Benzyl Ammonium Chloride	2.37%
Alkyl Dimethyl Ethyl Benzyl Ammonium Chloride	2.37%
Inert Ingredients	95.26%

Application:
Surface disinfectant in hospitals . It is used as a surface disinfectant in veterinary clinics, industries , schools , rest rooms .

Directions for Use :
Surfaces disinfection in critical areas - 15 ml of product solution to 1000 ml with tap water
Surfaces disinfection in non-critical areas - 7.5 ml of product solution to 1000 ml with tap water .
Fogging - To be used for every 1000 cu.ft in high risk areas like O.T., ICU, ICCU, NICU, Cath Lab, AKD etc. - 15 ml of product solution to 1000 ml with tap water Contact time : 20 minutes and for poliovirus type 1 contact time 30 minutes

Features

Aldehyde Free
Eco-Friendly Environmental Disinfectant
Non- Toxic, Non irritating Disinfectant
Non-corrosive and Non Hazardous
Packing: as per market demand.
Shelf life: 36 month.

INFICIDSP

Composition:
Each 100 gm contains
Glutaraldehyde   -   10 gm
Quaternary ammonium compounds.  -  12 gm

Application:
Surface disinfection of critical areas like ICU, ICCU, operation Theaters, Neo-natal Departments , Pharmaceutical sterile sections etc.
High level Disinfection and sterilization of metallic and non-metallic instruments.

Directions for use
For surface disinfection of critical areas
By mopping – Apply diluted solution of product to all surfaces liberally using a mop , allow the area to remain wet i.e in contact with the solution
By spraying – spraying can be done by simple sprayer working on air pressure .
For bacteria , fungi , viruses – 0.5 % concentration for 5 minutes contact time
For spores of bacillus subtilis – 2 % concentration for one hour contact time
For Mycobacterium Tuberculosis – 0.5 % concentration for one hour contact time

Features
Free from toxic Formaldehyde.
Economical since effective at lower concentrations.
Provides excellent cleaning and virtually no residue.
Non staining, non-corrosive with pleasant odour.
Effective in the presence of organic matter
Provides prolonged duration of activity
Packing: Bottle: as per market demand.
Shelf life: 36 months

 

INFIAMIN 3

Composition:
Bis ( 3-aminopropyl ) dodecylamine .- 5.1 w/v
Didecyl dimethyl ammonium chloride - 2.5% w/v

Application:
Surface and equipment disinfectant and cleaner.

Direction for use:
Use 0.25 % solution of Sani3amine for surface disinfection.
Use three bucket system for cleaning.

Features:
Aldehyde free formulation.
Non-corrosive without oxidizing agents.
Eco-friendly Environmental disinfectant.
Both detergent and disinfection action. Broad compatibility with materials and surfaces.
Packing: Bottle: as per demand.
Shelf Life: 36 Months

INFIECO

Composition:

Ethanol	15.0 % v/v
Isopropyl Alcohol BP	20.0 % v/v
Cocopropylenediamine	1,5
Bis- guanidiniumacetate	0.10 % w/v

 

Application :
Ready to use Surface disinfectant for disinfecting sensitive surfaces .
Direction for use :
It is ready to use.
Saturate the cloth with product solution and wipe surfaces .
If product is sprayed on, wipe with cloth .
When surfaces are wetted completely , the solution is effective within 30 seconds .
Do not use for the disinfection of invasive medical devices .

Features :
Ready to use Aldehyde free rapid disinfectant cleaner for sensitive surfaces.
Excellent wetting properties , especially material friendly .Dries without visible residue .
Broad spectrum of activity in short contact time .
Packing: Bottle : as per demand.
Shelf Life: 24 Months.

INFISID

Composition:
Dodecylamine  - 10% w/v
Guanidine  - 4% w/v

Application:
Disinfection of surfaces and equipments in all medical areas including operation theaters, clinics, dental surgeries, hospital wards ,Neonatal departments , delivery services, intensive care units .

Direction for use :
It can be used for disinfection of equipments and surfaces.
Disinfection of surfaces: Bactericidal -0.1 %, fungicidal – 1 % . Virucidal – 0.5 % contact time – 60 minutes
Disinfection of equipments: Virucidal, funficidal and tuberculocidal – use 2 % for 60 minutes contact time and 1.0 % with contact time 120 minutes

Benefits:
Safe for use , suitable for all surfaces and equipments in medical areas.
Possess excellent material compatibility.
Does not damage the treated tools in working concentration.
Packing: Bottle : as per demand.
Shelf Life: 36 Months

INFIRAPID

Composition:
Each 100 gms contains:
1-Propanol - 35 gms
Ethanol - 25 gms

Applications:
For rapid disinfection of medical devices in all hospital areas with a high infection risk, e.g.
Treatment units & adjoining surfaces
Examination tables
Operating tables
Medical device surfaces

Direction for use:
It is ready to use.
Saturate the cloth with product solution and wipe surfaces If product is sprayed on, wipe with cloth.
When surfaces are wetted completely, the solution is effective within 30 seconds.
For the disinfection of vertical surfaces, e.g. displays and monitors, and uneven surfaces like key boards and control panes spray the sufficient amount of product on a clean disposable cloth and thoroughly wipe the surfaces to be disinfected
Do not use for disinfection of invasive medical devices

Benefits:
Ready to use.
Dries rapidly, leaving no streaks.
Highly compatible with metals and synthetics.
Safe and environmentally friendly.
Packing :  as per demand.
Shelf life : 36 Months.